LD 5830 BGA Rework Station
Rs. 99000 (Extra 18.00% GST!)
|3rd IR heater||2800W|
|Lighting||LED working light (any angle adjusted)|
|Operation mode||Drawer style HD touch screen, intelligent conversational interface, digital system setting|
|Top heater movement||Right/left, frontward/backward. rotates freely.|
|Positioning||Intelligent positioning, PCB can be adjusted in X, Y direction with “5 points support” + V-groov pcb bracket + universal fixtures.|
|Temperature control||K-type sensor (closed loop)|
|PCB size||Max 410×370 mm, Min 22×22 mm|
|BGA chip||2x2 - 80x80 mm|
|Minimum chip spacing||0.15mm|
|External temperature sensor||1pc|
Want to buy even more quantity?
Features of the LD 5830 BGA Rework Station:-
1. Adapts linear slide which moves on X, Y and Z axis. All can micro adjust or rapid positioning with high precision.
2. High definition touch screen (made in Taiwan), PCL controlled, option to save multiple groups profile, password protection and modify function. Also equipped with instant temperature curve analysis function.
3. There are 3 independent heating areas. The 1st and 2nd are hot-air heaters and the 3rd is IR preheating.
4. It offers all kinds of hot-air nozzles and can rotate 360°. Comes with a magnet, is easy to install and change.
5. K-type thermocouple (closed loop), independent heating and temperature precision within ± 3degrees.
6. V-groove PCB support can be adjusted in any direction with external universal fixture, suitable for all kinds of BGA repair.
7. Powerful cross-flow fan rapidly cool the PCB board to improve efficiency; Also built-in vacuum pump and external vacuum suction pen, pick up the chips rapidly.
8.After finishing desoldering & soldering, an alarm goes off.
9.CE certificate, with emergency stop and Automatic power-off protection device when abnormal accident happens;with a double overheating protection control.