Lamp cap hole punching machine is use to tight the joints between the metal lamp cap and the plastic cover by punching holes to press it tightly .
This machine with automatic testing function ,while punching the lamp cap ,the lamp will flash light if the bulb is workable ,can check the effect of punching and whether the lamp is workable or not .
1.Use high quality cylinders ,one cylinder control one needle ,the depth of punching needle can be adjustable .
2.Adopt High quality ,high speed ,harden needles ,hardness>=60%.
3.With function of Automatic counting the number of punching lamps ,can calculate how many pieces of lamps you have punching and display automatically .
4. 0.3-1 seconds punching a lamp cap .
5. 3-4mm distance electromagnetic induction then punching ,can be adjusted.
6.With automatic and semi-atomatic switch (foot operation) ,you can choose the way you want .
7. Two conjoined air filter processor inside to dry the air .
8.Dimensions :L750*W550*H760 mm;
9.Net Weight: about 39 kgs .
10.Can be available for 220V, 110V .
11.One machine for one lamp base , for example ,E27 lamp cap punching machine just workable for E27 lamp base , we can make machines for othe lamp base like :E12,E12S,E14,E14S,E17,E27,B22,E26,E39,E40 ....make by your requirements .
The Normal Model is 12 needles with 12 cylinders to punching 12 holes , also have 6 needles and 8 needles if you need .
Different Lamp base need clarify .
Models can be for E27,E26 and B22, or E14,E12,E12S and other lamp base ,pls clarify your lamp base before purchase.